AVM Ovation A 6.2 Integrated (Master Edition)

AVM Ovation A 6.2 Integrated (Master Edition)
44.990,00  DKK
Et mesterklasse! Raffineret og puristisk udgave af den klassiske AVM Ovation A 6.2. Klasse A/AB MOS-FET, fuldt balanceret og DC-koblet. Ydelsen er 2 x 300 watt ved 8 ohm samt udrustet med klasse A hovedtelefonforstærker Leveres i AVM Ovation Flight Cases.
Leveringstid: 1-2 uger
ELLER
Beskrivelse

Detaljer

Et mesterklasse! Raffineret og puristisk udgave af den klassiske AVM Ovation A 6.2. Klasse A/AB MOS-FET, fuldt balanceret og DC-koblet. Ydelsen er 2 x 300 watt ved 8 ohm samt udrustet med klasse A hovedtelefonforstærker Leveres i AVM Ovation Flight Cases.
An audiophile masterpiece
With the A 6.2 Master Edition, AVM has created an integrated amplifier that has been consistently created for perfect, audiophile sound. The A 6.2 Master Edition integrated amplifier is the sound centre for all types of music, for all volumes, without any frills, with a powerful sound and without any compromises. Almost playfully effortlessly, the A 6.2 ME drives all speakers. The powerful, detailed and relaxed sound image is unique in its serenity. The sound of the A 6.2 ME is the sum of AVMs experience in amplifier construction since 1986, in a further refined edition – and 100% to the point.

What’s new in the A 6.2 Master Edition?
  • New high performance ultra silent transformer with 1000 VA
  • AVM power bank power supply with AVM capacitors
  • Extended Class A range
  • New internal cabling
  • Speaker terminals from the 3rd generation OVATION Line (.3)
  • New headphone amplifier from the 3rd generation OVATION Line (.3)
  • CELLINI version (chrome front) at extra charge
  • Older A 6.2 can be upgraded to A 6.2 ME (incl. additional warranty)
The A 6.2 Master Edition at a glance
  • Class A/B integrated amplifier with over 180/300 W/channel (into 8/4 ohms)
  • MOS-FET high current amplifier: 12 MOS-FET transistors per channel deliver max. 180 Ampere
  • 4 separate power supplies: main power supply, processor unit power supply, silent power supply for input circuit left & right
  • Analog fully balanced input stages, completely DC coupled
  • Fully balanced volume control with 256 control stages
  • Double mono construction eliminates mutual interference between both channels
  • Input stages are supplied via separate power supply unit
  • High level inputs: 2 XLR + 5 RCA
  • Home Theatre Pass Through selectable on high level inputs
  • 2 preamplifier outputs (XLR and RCA), fixed level output (RCA)
  • Class-A headphone amplifier with 6.3 mm jack plug
  • Connection for external IR receiver
  • Mains phase indicator
  • Sound control with bypass function
  • Parametric, scalable loudness control
  • Large, blue illuminated graphic display
  • Extensive menu functions (adjustable input sensitivity, individual input designation and much more)
  • Packaging: Sturdy OVATION flight case
  • Full metal RC 3 remote control included

The technology behind
The A 6.2 Master Edition is a Class A / AB amplifier equipped with MOS FET transistors in the output stages. These transistors are much faster than bi-polar transistors, but much more difficult to handle. The concepts of the characteristic curves of ideally matched transistors have helped AVM to achieve new levels of performance. AVM first implemented this principle in their power amplifier flagship models of the OVATION Line. The speed of this MOS-FET based circuit helps AVM to realize a sonic richness of detail never heard before. At the same time, AVMs special single-ended circuit topology of the output stage realizes the incredibly powerful, full and warm sound of the A 6.2 Master Edition.

The effort required for the sophisticated circuitry is immense: Independent power supplies feed all stages of the A 6.2 Master Edition individually and effectively exclude unwanted mutual interference between the amplifier stages. The input stages are completely DC-coupled and fully balanced. Incoming signals from the unbalanced inputs are buffered and balanced directly behind the input connectors. In addition, the input stages are consistently designed as double-mono architecture: Two identical circuits on two independent boards, each with its own on-board power supply, thus enabling a crosstalk distance between the left and right channel that even lies outside the measuring ranges of high-end measuring instruments. The 256-step volume control and the tone control are also fully balanced, resulting in a better signal-to-noise ratio of about 3dB each, and with less than 0.05 dB channel deviation at all volume levels.

The MOS-FET power amplifiers of the A 6.2 Master Edition are designed as single-ended architecture and are derived from the power amplifiers of the OVATION flagship series. All boards are constructed with extra thick 75µm pure copper tracks, completely gold-plated and coated with thermally tolerant black lacquer. All boards are assembled on site at the AVM factory. The driver stage has its own, separately controlled operating point adjustment. Our AVM engineers have put all their know-how into the design of this amplifier stage, which is particularly relevant for the sound: The LEDs used not only signal that the A 6.2 ME is functioning properly, but also produce much less noise than conventional “Zener diodes”. The power amplifiers are supplied by a 1000 VA main transformer specially developed for the A 6.2 Master Edition. The power supply is supported by in-house AVM ultra-quick capacitors in parallel connection with a total of 120,000µF (that’s 0.12F!).

The new Class A headphone amplifier is equipped with a self-contained amplifier unit and operates completely independently in Class A mode. This amplifier stage is located behind the 15 millimeter thick front panel.The entire OVATION housing of the A 6.2 Master Edition is reminiscent of a small save cabinet but is once again only a means to an end, as the A 6.2 Master Edition can be effectively cooled in this way and is correspondingly torsionally stiff, so that all components can be effectively protected against unwanted external influences such as vibrations. Another detail: The ball bearing knobs are turned from a single piece together with the axle and therefore do not require any grub screws. Behind it follows a long axis which leads to the screwed on rotary controls.

Further connection details: Separate preamplifier outputs can be used to connect additional power amplifiers such as the ideally suited OVATION SA 6.3 for optional bi-amping operation – in balanced or unbalanced mode. The A 6.2 Master Edition is completely updateable, so that additional functions can be easily added in the future. An active phase indicator also makes it easier for you to connect the power supply correctly. In the A 6.2 Master Edition many useful ‘helpers’ work in the background and help to achieve maximum ease of use: Protective circuits prevent damage e.g. in case of connection errors, soft mute functions suppress noise e.g. when switching at full volume. Various settings can be adjusted to your individual needs: For example, inputs can be renamed or levels of different input levels can be adjusted to each other. Home theatre loops (so-called AV Pass Through) are also selectable.

Like all AVM devices, the A 6.2 Master Edition is manufactured by hand at the AVM factory in Malsch, and the vast majority of suppliers, e.g. for the precision housing parts, are also located in the immediate vicinity. Repeated, intensive quality controls during all production stages and a break-in period of several days for each individual device ensure our promise of maximum reliability in the long term.

Specifications
Analog Inputs: 2 x XLR, 5 x RCA
Analog Outputs: 1 x RCA, 1 x XLR
Output Power: 2 x 300 W [4Ω]
Headphone Output: Class-A 6,35 mm
Speaker Outputs: 1 Pair
Tone Control: Balance, Bass, Treble, Contour (Loudness)
Trigger Outputs: 2 x 3,5 mm
Optional Remote Controls: RC 8 Remote Control
Included Remote Control: RC 3 Aluminium Remote Control
Power consumption: 1100 W max / < 0.5 W standby
Finish: Aluminium Silver, Aluminium Black
Product Dimensions: 355 x 430 x 130 mm (L x W x H)
Product Weight: 22 kg
Product Line: OVATION
Specifikationer

Specifikationer

Kort beskrivelse Et mesterklasse! Raffineret og puristisk udgave af den klassiske AVM Ovation A 6.2. Klasse A/AB MOS-FET, fuldt balanceret og DC-koblet. Ydelsen er 2 x 300 watt ved 8 ohm samt udrustet med klasse A hovedtelefonforstærker Leveres i AVM Ovation Flight Cases.
Vægt 22.00
Dimensioner (HxBxD) 355 x 430 x 130 mm
Leveringstid 1-2 uger
Type Integreret forstærker
Ydelse 180/300 W/channel (into 8/4 ohms)
Headfi amp Headphone Output: Class-A 6,35 mm
Input Analog Inputs: 2 x XLR, 5 x RCA
Output Analog Outputs: 1 x RCA, 1 x XLR