Clearaudio Statement Phono / RIAA

På lager
230.000  DKK
Leveringstid:3-4 uger

Kompromisløst RIAA-trin til Clearaudio Statement pladespilleren.

  • Gratis fragt over 750 DKK
  • Lagervarer sendes indenfor 24 timer
  • Afhentning i butik

Kompromisløst RIAA-trin til Clearaudio Statement pladespilleren.

The statement phono is at home at the absolute top – where the air is thin, but the sound quality reaches its maximum density. From the deepest bass to the highest treble, from the additional bass octave of an imperial grand piano to the piccolo flute of a full church organ and beyond, the statement phono presents sounds exactly as they are. It takes nothing away and does not add anything, but embodies the ideal of pure music reproduction.

Silver mica capacitors ensure that the signals are handled without loss. Only the most noise-free resistors and capacitors, carefully selected, are worthy to take their place on the circuit boards of this monumental twelve kilogram phonostage. This phonostage does not compromise. But it does allow you to connect and control the volume of all major sources via two phono inputs and two additional analogue inputs. For power, an external battery power supply is used, so that interference from the mains electricity grid does not exist.

The statement phono embodies the ultimate truth of listening, and with its switchable input resistors and freely adjustable equalisation curves, addresses the needs of discerning analogue fans that want to extract the best sound from their records. This sound laboratory in miniature is unique and unmatched in the analogue world.

Power supply: Fully symmetrical line and Accu - power supply
Nominal input voltage:
- 0.5 mV / MC mode (+54 dB)
- 5 mV / MM mode (+34 dB)
Headroom: +12 dB
Input load: 8 values, switchable RC (Remote control device)
- 5R, 25R, 50R, 100R, 250R, 500R, 1k, 47k
Main gain @ 1 kHz:
+ 54 dB = MC Mode
+ 34 dB = MM Mode
switchable MPS (Menu Pre Setting)
Subsonic filter: -24 dB / octave @ 20 Hz
switchable RC (Remote control device)
RIAA accuracy: + 0.05 dB / 20-100 kHz
Phono equalizer:
3 bands, +/- 6 dB, switchable RC (Remote control device)
50 Hz, 6 kHz, 10 kHz
Signal to noise ratio:
5 mV / 1kHz / +50dB: -82dB / -90dB ("A" weighted)
0.5 mV / 1kHz / +70dB: -72dB / -80dB ("A" weighted)
IMD: 5 mV / 1kHz / +50dB: < 0.01%
> 0.0035% ("A" weighted)

Power consumption:
Max. consumption: 200 Watt
Consumption in operation: 50 - 100 Watt
Standby mode: 0.5 Watt
Off mode: 0.0 Watt

Total weight:
- Preamplifier: 12 kg
- Power supply: 22 kg

Dimensions (W/D/H in mm):
- Preamplifier: 435 x 350 x 100
- Power supply: 435 x 350 x 100