Mark Levinson No. 585 integreret forstærker (Brugt)

Mark Levinson No. 585 integreret forstærker (Brugt)

Special Price 59.990,00  DKK

Pris: 110.000,00  DKK

Brugt Mark Levinson No. 585 i absolut perfekt stand og inkl. original emballage. Godt 1 år gammel. 2 års reklamationsret, heraf 3 måneders garanti.
Leveringstid: 5-7 dage
ELLER
Beskrivelse

Detaljer

Brugt Mark Levinson No. 585 i perfekt stand og inkl. original emballage. Godt 1 år gammel. Leveres med 2 års reklamationsret, heraf 3 måneders garanti.

Magasinet Lyd og Billede skrev "En af verdens bedste forstærkere. Punktum."

Specifikationer
- Integreret stereoforstærker
- 2 x 200 W 8 ohm, 350 W 4 ohm
- 1 x XLR balanceret, 3 x ubalancerede indgange
- 2.1 kanals udgang med subwoofer-udgang
- USB, AES/EBU, 2 x optiske, 2 x koaksiale digitalindgange
- 32 bit/192 kHz digitalkonverter

Mark Levinson No. 585 er en integrerede forstærker på 2x200W i 8 Ohm. Fuldt balanceret dual mono opbygning, 10 indgange, USB DAC og HARMAN Clari-Fi.
The foundation of the Nº585 is its fully discrete, mirror-imaged, dual-monaural analog circuitry featuring individual signal switching relays for each of its four stereo inputs: one XLR and three RCA.

Volume controls use discrete 15-bit R-2R ladders and low-noise analog switches for the widest possible bandwidth and maximum signal integrity.

The fully-differential Class AB power stage includes an oversized 900VA toroidal transformer with individual secondary windings for the left and right channels. Each elegantly simple amplifier channel utilizes twelve output transistors and multiple smaller local capacitors that allow them to be placed physically closer to the amplifiers for greater transient response when power is needed immediately - This robust architecture results in a conservative power rating of 200W per channel with stability into 2 ohms.

System integration and expansion are possible using the stereo RCA preouts which can operate full-range or with an included switchable, second-order, 80Hz crossover filter allowing for seamless integration into 2.1-channel systems with powered subwoofers.

From Mark Levinson's heritage comes perhaps the finest, most-accomplished integrated amplifier ever made: the Nº585. Combining Mark Levinson's unsurpassed analog performance with advanced digital audio capability and flexible system configuration, the Nº585 pushes the reproduction of any source material to new levels of realism.

Specifications
Amplifier Section Output Power 200W RMS per channel @ 8 Ω, 20Hz – 20kHz
Amplifier Section Damping Factor >400 @ 20Hz, referred to 8 Ω
Amplifier Section Frequency Response 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
Amplifier Section Signal-to-Noise Ratio >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
Amplifier Section Voltage Gain 40.7dB (maximum volume setting)
Amplifier Section Total Harmonic Distortion <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
Preamplifier (Analog) Input Impedance >45k Ω (RCA & XLR)
Preamplifier (Analog) Input Overload >5.5V RMS (RCA & XLR)
Preamplifier (Digital) Sample Rates/Bit Depth PCM 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD Native, single- and double-speed
Analog Audio Connectors 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
Control Connectors 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)
Mains Voltage 100V AC, 115V AC, or 230V AC (factory-set)
Power Consumption Maximum 1000W (power on)
Unit Dimensions (H x W x D) 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)
Packaging Dimensions (H x W x D) 19" (483mm) x 26" (660mm) x 26" (660mm)
Weight 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging

Audio Specifications

Amplifier Section Output Power 200W RMS per channel @ 8 Ω, 20Hz – 20kHz
Amplifier Section Damping Factor >400 @ 20Hz, referred to 8 Ω
Amplifier Section Frequency Response 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
Amplifier Section Signal-to-Noise Ratio >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
Amplifier Section Voltage Gain 40.7dB (maximum volume setting)
Amplifier Section Total Harmonic Distortion <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
Preamplifier (Analog) Input Impedance >45k Ω (RCA & XLR)
Preamplifier (Analog) Input Overload >5.5V RMS (RCA & XLR)
Preamplifier (Digital) Sample Rates/Bit Depth PCM 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD Native, single- and double-speed
Analog Audio Connectors 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
Control Connectors 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)
Mains Voltage 100V AC, 115V AC, or 230V AC (factory-set)
Power Consumption Maximum 1000W (power on)
Unit Dimensions (H x W x D) 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)
Packaging Dimensions (H x W x D) 19" (483mm) x 26" (660mm) x 26" (660mm)
Weight 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging

Mere:
https://www.marklevinson.com/support/NO585-.html
Specifikationer

Specifikationer

Kort beskrivelse Brugt Mark Levinson No. 585 i absolut perfekt stand og inkl. original emballage. Godt 1 år gammel. 2 års reklamationsret, heraf 3 måneders garanti.
Vægt 32.60
Dimensioner (HxBxD) 175mm x 438mm x 507mm
Leveringstid 5-7 dage
Type Integreret forstærker
Output 2 x 200 watt