Nordost Red Dawn Power

På lager
3.790 DKK
Leveringstid:2-4 dage

Nordost Red Dawn Power er et gedigent kabel, som fungerer godt med f.eks. klasse D-forstærkere. Som de øvrige strømkabler er det baseret på Micro-Mono-Filament konstruktionen fra Nordost og består af 3 x 14 AWG-ledere som er forsølvet kobber.

  • Gratis fragt over 750 DKK
  • Lagervarer sendes indenfor 24 timer
  • Afhentning i butik

Nordost Red Dawn Power er et gedigent kabel, som fungerer godt med f.eks. klasse D-forstærkere. Som de øvrige strømkabler er det baseret på Micro-Mono-Filament konstruktionen fra Nordost og består af 3 x 14 AWG-ledere som er forsølvet kobber.

Nordost Red Dawn Power kan leveres med stik som enten low-profile eller 15 Amp til de såkaldte 20 Amp US-netbrønde, som f.eks. Audio Research og Krell benytter.


It used to be the case that all systems ran on stock power cords, but recent experience has shown that, far from the occasional afterthought they once were, properly designed audiophile power cords are fundamental to system performance. In fact, the effects are so demonstrable, so obvious, that power cords are fast assuming their proper position as the most important cables in your system.

The Red Dawn Power Cord employs high-speed, low-loss, heavy gauge 3 x 14 AWG Micro Mono-Filament conductors sheathed in FEP insulation. The minimal dielectric effect and propagation delay ensures that power is transported as directly as possible, straight to your equipment, while purpose built, audio-grade connectors maintain the low source impedance of your AC supply and ensure superior grounding.

Insulation: Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned lay, Micro Mono-Filament design
Conductors: 3 x 14 AWG
Material: 105 strand 99.9999% OFC
Capacitance: 10pF/ft
Inductance: 0.10 μH/ft
DC Resistance: 2.8 Ohms per 1000ft
Velocity of Propagation: 81%
Termination: US (Nema), EU (Schuko), UK or AUS to IEC-C15 or IEC-C19 connectors. Figure 8 IEC-C7 also available