Shunyata Sigma v2 XC er det ideelle strømkabel til power conditioners. Leveres med EU stik.
Shunyata Research’s new Reference Line power cords were developed using the
same materials science and technologies that make the Omega the market’s
ultimate cost-no-object power cord. The Reference Line power cables are designed
to be used with the worlds finest audio components.
There are three
levels of performance in the Reference Line starting with the Delta v2 and
models. The Alpha v2 is a level up from the Delta v2 and represents the best
price-to-performance in the lineup. The Sigma v2 takes top honors in the line
for those that must have the best. All three Reference models feature Shunyata
Research’s exclusive VTX-Ag conductors that combine an ultra pure silver with a
concentrically wound layer of OFE copper. This provides the speed and
transparency of silver with the richness, tonal color and power of pure copper.
Reference XC cables are designed specifically to optimize the performance of
Shunyata Research power conditioners. The Sigma v2 XC cables eschew noise
reduction features in favor of enhanced DTCD (dynamic transient current
delivery). Using proprietary conductors and parts developed for the Omega XC,
the Sigma v2 XC delivers pace-setting DTCD™ instantaneous current delivery,
optimizing power conditioner and high-current amplifier performance.
Application: The Sigma v2 XC is an ideal power cable for your Shunyata Research
power conditioner while the Sigma v2 NR provides noise reduction to the source
components. The Sigma v2 NR provides great performance for all of the source
equipment like CD players, DACs, tuners and preamplifiers.
Power Conditioners: Hydra Sigma S12, Denali 6000/S v2, Everest 8000
Specifications SIGMA v2 XC Power Cable
Cable Type: VTX-Ag 06
ArNi® / OFE
Connectors: CopperCONN™ Carbon-Fiber
Noise Reduction: NA
HARP Module: NA
KPIP Processing: 4-days
Length: 1.75 meters
Continuity and polarity tests –
by two technicians
HiPOT tests insulation breakdown @ 4,500 VAC
Analysis is a technique that measures instantaneous current through low
impedance electrical conductors and contacts. Shunyata Research uses it to
optimize the design, specification and construction of parts and materials to
ensure maximum current delivery performance. Each part, conductor, noise circuit
and material inside the Delta allows for maximum throughput of instantaneous
Listeners will experience earth-shaking low-frequency
performance from even the highest-current amplifiers as well as dynamic
contrasts unheard of outside of a live event. More than any other design
parameter, Shunyata Research’s skill at reducing impedance and improving dynamic
instantaneous current is unparalleled.
CopperCONN™ Carbon Fiber
Shunyata Research has developed its own line of CopperCONN™ connects that
feature true carbon fiber head-shells. The internal contacts are culled from
solid OFE copper and feature a high-tension, spring-loaded contact for a
vice-like grip. This contributes to a measurable improvement in DTCD™
performance and a correspondingly obvious difference in audible performance.
CopperCONN™ connectors have a measurably lower contact-junction resistance
and are hermetically sealed with an inert compound that protects the contacts
and wires from corrosion. This also ensures that the wires cannot become loose,
fray or pull out from the head shell. This guarantees a lifetime of reliable
performance that does not degrade over time.
ArNi® wire was designed by
Shunyata Research to be the finest quality wire available. It begins with the
highest purity of copper and silver metals available, including Ohno (single
crystal), PCOCC silver and OFE C0101 conductors. Fluorocarbon dielectrics,
usually only found in aerospace applications that have exceptional electrical
characteristics including extremely low dielectric absorption, high dielectric
strength and superb heat resistance. When used in digital wiring it
significantly reduces transient energy storage and release which affects phase
VTX-Ag cables are uniquely constructed with both an
inner, center conductor made of pure silver and an outer concentric ring
conductor made of pure copper. It is made using the finest fluorocarbon
insulation to minimize dielectric absorption and re-radiation which translates
to an improvement in resolution and clarity. VTX-Ag delivers the speed and
clarity of silver and the midrange warmth and three dimensional power in the
lower octaves of copper without imparting any of the negatives associated with
Shunyata Research uses only the highest purity of copper
available for the production of its wire products. OFE Alloy 101 or C10100 is
the highest grade of copper with a minimum 99.99% purity and a conductivity
rating of 101% IACS. OFE stands for oxygen-free electrolytic and supersedes the
term OFHC (oxygen-free high conductivity). C10100 is the only grade of copper
that comes with a written certification of purity.
dielectrics are usually only found in wire used in the aerospace industry,
satellites and only the most expensive audiophile cabling. It has special
electrical characteristics; very low dielectric absorption, high dielectric
strength and exceptional heat resistance. When used in audio and power cables is
reduces the perception of dynamic compression and it improves sonic low-level
resolution and clarity.
Simple crimping, soldering, brazing and screws
are all inferior methods of joining two wires or terminals together. Sonic
welding uses high-energy sonic waves to literally join two metals together at a
molecular level and cold-welding uses high-energy pneumatic pressure to bond
metals. Shunyata Research uses both methods to secure connections that do not
degrade over time.
Kinetic Phase Inversion Processing was developed by
Caelin Gabriel after years of research into the underlying causes of various
effects such as burn-in, wire directionality and the effects of cryogenic
treatment. He discovered that there was an underlying core principle that
burn-in and cryogenics only partially addressed. Once the governing principle
was understood it became possible to create a processor that reduces the need
for long burn-in periods and eliminates the effects of cryogenic treatment.
Four-days of continuous KPIP™ processing dramatically reduces the sonic ups and
downs associated with burn-in, delivering a relaxed and natural presentation.