Soulution 311 Stereo

På lager
135.000 DKK
Leveringstid:3-4 uger

Power, kontrol og hastighed ... meget tæt på referencemodellerne. Soulution 311 Stereo Amplifier er udstyret med den samme unikke "switch-mode" strømforsyning, optimeret til audiofile. Bliv inspireret af en kompromisløs afspilning med variation og naturlighed. En lydoplevelse som vil fornøje enhver - overbevis dig selv!

  • Gratis fragt over 750 DKK
  • Lagervarer sendes indenfor 24 timer
  • Afhentning i butik

Power, kontrol og hastighed ... meget tæt på referencemodellerne. Soulution 311 Stereo Amplifier er udstyret med den samme unikke "switch-mode" strømforsyning, optimeret til audiofile. Bliv inspireret af en kompromisløs afspilning med variation og naturlighed. En lydoplevelse som vil fornøje enhver - overbevis dig selv!

Design

The audio section of the 311 is physically separated from the power supply and digital circuits. In order to reduce interferences to a minimum, these sections are additionally shielded. The power amplifier section as well as its dedicated power supplies are executed in dual-mono layout for optimal channel separation (> 105 dB) which is key for a three dimensional sound stage.

Amplification

The amplification circuit of the 311 is based on the technology used in our Series 5 amplifiers. Current amplification is done in three stages, each with a narrow, almost linear operating range. The high Class A operation supplemented by more than 160,000 µF of storage capacitance results in a nearly infinite impulse response. High-precision idle current management ensures optimal Class A operation for all conditions, without requiring any readjustment in the music signal. Optimal sound is thereby guaranteed immediately from switch on. Control circuits that protect against RF or DC signals at the input, and short circuits at the output ensure safe operation in all situations.

Power supply

A total of six power supplies – optimized for each function – feed the 311 stereo amplifier. Four cutting-edge switched-mode power supplies deliver 1,200 VA of audiophile quality power. They feature high performance filtering at the input and output, and high speed soulution voltage regulators to deliver considerably more stable power than any conventional, transformer-based technology.

Mains:
220 – 240 V (50 – 60 Hz)
100 – 120 V (50 – 60 Hz)

Power consumption:
< 0.5 W Standby
idle 350 W

Loudspeaker:
2 pair loudspeaker binding posts

Gain:
+ 26 dB

Power output:
120 W @ 8 Ω
240 W @ 4 Ω
480 W @ 2 Ω (dynamic)

Frequency response (– 3 dB):
0 – 800 kHz

THD + N:
< 0.001%

Signal-to-noise ratio:
> 120 dB

Damping factor:
> 5,000

Output current max:
30 A

Analog inputs:
1 × balanced (XLR)

Input impedance:
2 kΩ balanced (XLR)

Channel separation:
> 110 dB

LINK (remote turn-on):
2 x phone jack (3.5mm)

Dimensions:
430 x 490 x 142 mm (WxDxH)
Weight ~16 kg