Soulution 701 Mono (par)
120 amp RÅ power og 1 million mikrofarad kapacitet og 4 stk 600 VA switch-mode strømforsyning resulterende i mere end 12.000 watt peak forstærkerkraft. Model 701 er Soulution's absolutte topmodel indenfor forstærkere byder på de kræfter du kan tænkes at skulle bruge.
- Gratis fragt over 750 DKK
- Lagervarer sendes indenfor 24 timer
- Afhentning i butik
120 amp RÅ power og 1 million mikrofarad kapacitet og 4 stk 600 VA switch-mode strømforsyning resulterende i mere end 12.000 watt peak forstærkerkraft. Model 701 er Soulution's absolutte topmodel indenfor forstærkere byder på de kræfter du kan tænkes at skulle bruge.
Two amplifier channels can be used either in mono-mode or in dual-mode. They work perfectly load stable and 100% level and phase accurate like in the soulution 711 with shortest signal paths and no excessive open loop gain as often associated with solid state amplification. The soulution 701 monoamplifier is an ultra-fast and ultra wideband design (2 MHz/– 3 dB) and provides peak current ratings that would never be possible with a tube design. The unique concept of the soulution 701 monoamplifier combines seemingly contradicting qualities. Precision, Velocity, Stability and Power. The soulution 701 is closest of all to this ideal. As monoblock design it is capable of up to 1,200 W of continuous power (into 4 ohm) and more than 12,000 W of transient power. More than enough to breathe new sonic life into even the most demanding, low-efficiency loudspeakers.
To deliver these impressive power levels we have used bridged amplifiers. Optimized mechanical construction ensures both amplifier circuits are perfectly balanced, sharing identical thermal conditions and ideal grounding. When no music is playing an intelligent control system automatically lowers the quiescent current. And when loudspeakers dictate bi-amping, the soulution 701 monoamplifier can be easily switched to this mode. We think of it as tailor-made amplification.
The new power supply of the soulution 701 monoamplifier is based on audio grade “switched mode” modules. Four units with 600VA each combined with highend storage capacitors (> 1,000,000 MicroFarad) provide enough power reserves that allow the 701s reproduce even very complex music signals with ease. Circuitry that does not process audio signals should not be able to influence them. That’s why we use dedicated power supplies within each monoamplifier for the ancillary stages.
Power, mode and input functions are operated from front panel buttons. Power toggles between on and off states. Mode transfers control of turn-on to an associated preamplifier via soulution’s LINK system. Input selects the desired input and mutes the others.
The monoamplifier 701 does have balanced and unbalanced inputs. With the balanced connection the input signal can be bypassed to another amplifier. Switches at the back of the amplifier allow to define the start options for the brightness of the display, the start-condition of the amplifier and the operation mode (mono or bi-amping).
Mains:
220 – 240 V (50 – 60 Hz)
100 – 120 V (50 – 60 Hz)
Power consumption:
< 0.5 W standby
idle 300 W / 200 W
max 1600 W
Outputs:
2 pairs Cu-terminal, gold plated
Gain
Dual: + 26 dB
Mono: + 32 dB
Power output
600 W @ 8 Ω (2 × 150 W*)
1200 W @ 4 Ω (2 × 300 W*)
2000 W @ 2 Ω (2 × 600 W*)
*in dual mode
Pulse power:
> 12,000 W
Frequency response (– 3 dB):
0 – 2 MHz (0 – 1 MHz*)
*in dual mode
THD + N:
< 0.0003% at 50 W @ 4 Ω
(20 Hz – 20 kHz)
IM distortions:
< 0.005% SMPTE
< 0.0006 CCIR
Signal-to-noise ratio:
108 dB (5 W @ 1 kHz)
Damping factor:
> 10 000
Output current max:
120 A (limited)
Inputs:
1 × balanced (XLR)
1 × unbalanced (RCA)
Input impedance:
2.3 kΩ balanced (XLR)
4.0 kΩ unbalanced (RCA)
Dimensions:
560 × 306 × 585 mm (W × H × D)
Weight approx. 75 kg
LINK (remote turn-on):
12 V control signal
