Violectric DHA V590² Headphone Amp / DAC

På lager
23.790  DKK
Leveringstid:1-2 uger

Violectric DHA V590 ² er den nye topenhed i Violectric-serien, en kombineret høretelefonforstærker og DAC.

  • Gratis fragt over 750 DKK
  • Lagervarer sendes indenfor 24 timer
  • Afhentning i butik

Violectric DHA V590 ² er den nye topenhed i Violectric-serien, en kombineret høretelefonforstærker og DAC.

- Lowest noise through a very small amount of internal gain
- High output voltage through 50 V internal operating voltage
- High output power to drive your headphones
- High damping factor due to lowest output impedance
- Balanced Headphone Amp
- AKM-based 32 bit DAC + 32 bit Resampler (PCM & DSD)
- Femto-Clock (standard)
- Remote control (standard)
- 256 step relay volume (Optional Pro model)

It offers a state-of-the-art D/A converter and a headphone amplifier. The D/A converter is a new development and includes a 32-bit resampler / reclocker and two 32-bit D/A converters per channel. The latest findings from the multiple test winners from Violectric and Niimbus were implemented in the headphone amplifier. Most functions can be conveniently controlled using a stylish remote. With its incomparable technology, DHA V590² not only offers one of the most powerful headphone amplifiers in the market, but also:

Lowest Noise - through a very small amount of internal gain. This makes the amplifier's self-generated noise inaudible.

High Output Voltage - through 50 V internal operating voltage. Therefore ideally suited for high-impedance headphones deserving high output voltage swing.

High Output Power - thanks to powerful amplifiers that offer far more power even the most demanding headphones would need. So best suited for headphones with low impedances as well as magnetostatic headphones

High Damping Factor - due to lowest output impedance. Therefore the ideal match for difficult to drive headphones without negative side effects and with the guarantee for a uncompromising frequency response.

It is on you:
Headphone amplifier? Pre-amplifier? Both ! The headphone outputs and / or the line outputs can be activated / deactivated by buttons on the front or by remote control. Connect not only your headphones to the DHA V590² but also your power amplifier or your active speakers and enjoy a compact and fantastic sounding headphone amplifier with a State-of-the-art D/A converter and a premium preamplifier

Control the DHA V590² with its stylish remote control, milled from a solid piece of aluminum. Via infrared rays you have access to motorized volume control, mute, input selection, resampling settings, Headphone and line-out control.


3 analogue inputs
2x RCA
1x XLR
4 digital inputs     Optical
AES balanced


2x 32 Bit AK4490 per channel

32-bit Resampler with a dynamic range of up to 180 dB

Power and Noise

8 dB less noise than the V281

2x 15 Watt PSU
Switchable between 115 and 230V

Gain Factor
0 dB unbalanced, 6 dB balanced

Pre-gain settings
DIP switches: -18, -12, -6, 0, +6, +12, +18 dB, same for the line out

Pre and post fader
Work via the push of a button on the back and not via software control

Output Voltage
(balanced output, both channels driven): 32 Volt = 1.8 Watts @ 600 Ohm

Maximum power
(balanced output, both channels driven): 5 Watt @ 50 Ohm

-100 dB

-102 dB

Output impedance
< 0.2 Ohm

Damping factor
> 250


W x H x D (mm)
290 x 80 (90 with feet) x 250

Front 8 mm Aluminium sanded, brushed, black anodized, knobs with a with plastic inlay Case up to 12 mm strong aluminium, brushed and anodized