Clearaudio Nano Phono v2 / RIAA
Clearaudio Nano Phono v2 er et entry-level RIAA-trin, eminent til prisfornuftige løsninger. Nu i version 2, som er endnu bedre. 47 kOhm til MM og justerbar til MC. Gain fra 34 til 68 dB, afhængig af MM eller MC valg. Fås også med hovedtelefonudgang.
- Gratis fragt over 750 DKK
- Lagervarer sendes indenfor 24 timer
- Afhentning i butik
Clearaudio Nano Phono v2 er et entry-level RIAA-trin, eminent til prisfornuftige løsninger. Nu i version 2, som er endnu bedre. 47 kOhm til MM og justerbar til MC. Gain fra 34 til 68 dB, afhængig af MM eller MC valg. Fås også med hovedtelefonudgang.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
The nano phono headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
Manual:
https://clearaudio.de/_assets/_pdf/manuals/electronics/CA_Nano%20P+%20Headphone%20V2_D+E.pdf
Amplification 34 dB (MM mode): 65 dB (MC mode)
Input load: 47 kOhm / 220 pF / MM mode
User MC mode
MM / MC input: Switchable (at bottom)
Subsonic Filter: Switchable (at bottom)
RIAA: Nach RIAA (Zeitkonst.: 75 μs / 318 μs / 3180 μs)
RIAA accuracy: ± 0.4dB @ 20Hz-50kHz
THD: < 0,04%
Headroom: 18 dB / MC
Signal to noise ratio:
81 dB (A) (MM – Mode)
70 dB (A) (MC – Mode)
Channel separation: > 80dB @ 1kHz
Max. output voltage: 10V eff. (1kHz)
Power consumption:
Max. consumption: 2.3 Watt
in operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off mode: 0.0 Watt
Power supply: ±18V DC / 300mA (external power supply)
Outputs: Unbalanced (RCA)
Weight: Approx. 500 g (preamp and power supply)
Dimensions (W/D/H in mm): 85 x 106 x 25
