PS Audio Stellar Phono / RIAA
PS Audio's første produkt tilbage i 1975, var en phonoforstærker (RIAA) som tog hifiverdenen med storm - Stellar Phono tager skridtet videre. Baseret på en unik og fuldstændig diskret FET-topologi adskiller Stellar Phono sig fra traditionelle IC-design. Lyden er fyldig, varm og lokkende, som kun vinyl kan være.
- Gratis fragt over 750 DKK
- Lagervarer sendes indenfor 24 timer
- Afhentning i butik
PS Audio's første produkt tilbage i 1975, var en phonoforstærker (RIAA) som tog hifiverdenen med storm - Stellar Phono tager skridtet videre. Baseret på en unik og fuldstændig diskret FET-topologi adskiller Stellar Phono sig fra traditionelle IC-design. Lyden er fyldig, varm og lokken, som kun vinyl kan være.
When PS engineer Darren Myers set his sights on building the best phono stage our company has ever produced, he had his work cut out for him. With the advantage of modern upgraded FET semiconductors and a fresh approach to the art of phono preamplification at his side, Darren wiped the tradition slate clean by hand-fashioning a new approach to the challenge of amplifying and preserving all the magic trapped in the grooves of our records. The results are breathtaking. Music that might once have been locked into the confines of our loudspeakers is suddenly free. What you hear fills the room with a rich tonality that has always been vinyl’s promise, but rarely fulfilled to the degree Stellar has achieved.
Stellar phono features dual inputs that can support either a moving coil or moving magnet cartridge, or a two-tonearm set up to enjoy the best of each at the user’s discretion. Cartridge loading and gain options are easily adjusted from your listening position via the supplied remote control.
Phono preamplifiers at anywhere near this price range are almost always integrated circuit based, but not Stellar. Input to output, Stellar is a fully discrete FET design with extraordinarily low noise and high overload capabilities so even the wildest dynamics from the punchiest cartridges sail through Stellar with no limitations or compromise whatsoever.
If you love vinyl you’ll love Stellar!
Moving Magnet and Moving Coil preamplifier
Fixed and variable cartridge loading adjustable from remote control
Up to 70dB of ultra low noise gain for MC cartridges as low as 0.15mv
Two inputs for two tonearms selectable from remote control
Single ended and balanced outputs
All discrete FET design
Class A analog circuitry throughout No ICs in signal path
Up to 20V rms output for unparaleled headroom and dynamics
Passive RIAA curve for seamless performance
Hand selected premium discrete components
DC coupled from input to output for unfettered bass
Ultra low noise discrete pre and post voltage regulation stages
Low internal feedback for increased transparency and openness
No complimentary FET transistors for lifelike performance
High current oversized power transformer
Front panel standby button
Gain MM: 44 dB, 50 dB og 56 dB
Gain MC: 60 dB, 66 dB og 72 dB
Load MM: 47k
Load MC: 60 ohm, 100 ohm, 200 ohm, 47k ohm samt customer 1-1000 ohm
STELLAR PHONO PREAMPLIFIER
Color Options: Black, Silver
Voltage Options (Factory set only): Europe/Asia/Australia/New Zealand 230V
Mains Power Input: IEC C14
Idle Power Consumption: 26W
100V: T250V-2.0AH (2A Slow Blow)
120V: T250V-1.6AH (1.6A Slow Blow)
230V: T250V-1AH (1A Slow Blow)
US (NEMA 5-15P) (100V/120V versions)
Schuko (CEE7/7) (230V version)
UK (BS1363) (230V version)
Audio Inputs: RCA (Unbalanced) MM,MC
RCA (Unbalanced) 1 Stereo Pair
XLR (Balanced) 1 Stereo Pair
DC Trigger: 3.5mm 12VDC (2)
All measurements are with both channels operating, gain set to low, and balanced outputs.
Input frequency is 1kHz.
MM: 44dB, 50dB, 56dB
MC: 60dB, 66dB, 72dB
MM: 47KΩ (100pF)
MC: 60Ω, 100Ω, 200Ω, 47KΩ, Custom 1-1KΩ
Balanced <200Ω per leg
Frequency Response: 20Hz – 20KHz +/- 0.25dB
THD: 0.5V out @ 1kHz: <0.01%
Maximum Output: @1%THD: 24VRMS
Overload Margin: @1kHz: >22dB
MM: >82dB A-Weighted
MC: >74dB A-Weighted
Interchannel Crosstalk: >74dB
Power Consumption: 26W
Unit Weight: 9.8 kg
Unit Dimensions: 432 x 305 x 82 mm